产品中心&Product Center
钢屑处理机
Steel Scrap Treating Machine

钢屑处理机:
  该机是我公司针对机床车削下来松散缠绕于一堆的钢屑,难以堆放、装车、运输、回炉冶炼,需要进行细化处理而自主研制的钢屑处理机。已申报国家专利。
  钢屑处理机是通过电动机、三角皮带、减速机减速后带动装有剪切齿的主动滚筒、经齿轮带动装有剪切齿的从动滚筒,使双滚筒同时向外侧旋转,将松散缠绕于一堆的钢屑投入进料斗,双滚筒剪切齿将钢屑拉至并通过进料斗内两侧固定剪切齿进行剪切。经拉剪切细化处理后的钢屑,便于堆放、装车、运输、回炉冶炼,降低钢屑回收利用成本。本机结构简单结实,操作和检查维护方便,钢屑处理能力大、成本低,是钢屑细化处理的最佳设备。

Steel scrap treating machine :
    In view of  requirements for size reduction of  the loose steel scraps which are produced by lathe turning and twine  around each other ,  and difficult  for piling up, truck loading and transporting and recycling to the smelting furnace, our company has developed independently a steel scrap treating machine to treat the loose steel scraps .  National patent has been applied for the machine.
  The  steel scrap treating machine works in this way : The drive roller with shearing teeth is driven to rotate  by the motor through  speed reduction of triangle belts and a decelerator, and  the driven roller with shearing teeth is driven  to rotate  by the drive roller through a gear, forming  outward rotation of both rollers . The loose steel scraps  twining  around each other will be fed into the feeding hopper , and then the shearing teeth of the two rollers will pull the steel scraps down through the feeding hopper ,where they are sheared by the shearing teeth on the two inner sides of the feeding hopper and on the surfaces of both rollers . After size reduction by pulling and shearing of the machine , the steel scraps are convenient for piling up ,truck loading , transporting and returning to the smelting furnace , leading to the reduction of recycling cost of steel scraps . The  machine is of simple and solid structure, convenient  to operate and check and maintain, of  high throughput of steel scraps and of low operating cost , an optimal equipment for size reduction of steel scraps.

技术参数Technical  parameters

型号规格
Type

进料口尺寸
Size of feed opening

滚筒转速
Rotation speed
of drum
(r/min)

处理能力
Throughput

滚齿直径
Diameter
of hobbing

减速机
Decelerator

电机功率
Electromotor
power

重量
Weight

外型尺寸
Exterior
Dimensions

备 注
Remarks

(cm)

(t/h)

(mm)

(kW)

(t)

长宽高(m)
L×W×H
(m)

GX918

1800×1800

20

8.0-16.0

820

JZQ1000

110.0

13.0

4.00×2.50×3.0

配Y系列电机
配软启动柜
Y series motor and
soft starter cabinet are configured .

GX0714

1400×1400

25

5.0-10.0

650

JZQ850

75.0

9.0

3.40×1.80×2.5

GX0510

100×100

35

3.0-6.0

470

JZQ750

55.0

7.0

2.90×1.30×2.00

 
友情链接&Friendly Link
| | | | | | | | | | |
在线咨询
Inquiry Online